🇺🇸🇺🇸 USA STOCK - FREE SHIPPING TO THE USA 🇺🇸🇺🇸

    0

    Your Cart is Empty

    KRISS VECTOR Gel Blaster UPGRADED - US STOCK

    US STOCK

    US STOCK

    100% SECURE CHECKOUT

    100% SECURE CHECKOUT

    FAST SHIPPING

    FAST SHIPPING

    • Get the power
    • Full upgraded
    • GBG production
    • US STOCK 🇺🇸🇺🇸🇺🇸



    INTRODUCTION OF LEHUI KRISS VECTOR V2 UPGRADED


    The Lehui KRISS VECTOR V2 UPGRADED draws inspiration from the Kriss Vector, also known as TDI KRISS Super V, which is a modern machine gun introduced by KRISS USA Inc. 

    Noteworthy for its unique structure and operational design intended to absorb the energy generated during firing, the KRISS VECTOR V2 UPGRADED has gained widespread popularity and is frequently featured in various video games.


    Read more information about the original Kriss Vector V2 Gel Blaster.  

     

    PREORDER: SHIPPING DURING JULY 2024, first-come-first-served.


    PRESENTATION VIDEO OF LEHUI KRISS VECTOR V2 UPGRADED:



    Presentation of the upgraded parts

    • T238 Mofset
    • SHS gears
    • SHS 1.3 spring
    • SHS piston and tube
    •  Alloy barrel
    • 11.1V battery
    • 480 32.2W 11.1V motor
    • Hop-up Z2
    • Green O-ring
    • 11.1V battery
    • Special decoration stickers


    All the gearbox is upgraded ! 



    What is included in the box of the gel blaster LH KRISS VECTOR V2 UPGRADED PACK?


    • gel baster LEHUI KRISS VECTOR V2 UPGRADED
    • magazine
    • straight grip
    • nozzle
    • 11.1V battery
    • Charger
    • Packet of gel balls
    • bottle



    What accessories  add to the KRISS VECTOR Gel blaster?




    Double drum mag: Upgrade the gel balls capacity



    Instruction for the KRISS VECTOR UPGRADED 


    Method for Soaking Sandblasting Gel Balls

    1. Add water first before adding the gel balls; the container must be large, and use as much water as possible, preferably a water bucket or a large basin. Slowly pour the gel balls into the water (for the first use, do not soak too many; one-fourth of the bag is sufficient).
    2. Stir every 15 minutes to prevent the gel balls from sticking together.
    3. Soak the gel balls in water for 2 hours (in winter, if the water temperature is low, add an additional 15-30 minutes; stop soaking as soon as the central white spot disappears, do not over-soak).
    4. Wipe the surface water stains off the gel balls with a large towel (increase the friction between the balls and the barrel for better trajectory).[This is crucial; many people struggle with trajectory issues due to this reason. Also, excessive water in the gel balls may cause a short circuit.]
    5. Store in a bottle.


    The trajectory of the gel balls is influenced mainly by the gel balls themselves (70%), and the launcher accounts for 30%. However, achieving a beautiful trajectory depends on fully mastering the skills of the launcher; if done properly, the gel balls can achieve 70-80%.

    Keep the size around 7.3mm and as uniform as possible. **[Controlling the size of the gel balls is crucial for trajectory; unclear gel ball soaking can't correct the trajectory.]*


    Lithium Battery Usage Precautions


    Avoid excessive discharging and overcharging of lithium batteries.

    Do not charge for more than 3.5 hours; recharge when you feel the power weakening.

    Do not wait until the battery is completely drained before recharging, as this can damage it. In single-shot mode, every shot is in the startup state, with startup current being 4-7 times that of normal firing.

    Normal usage of 10 single shots consumes more power than 100 consecutive shots, which can harm the battery and motor.


    Special Notes


    1. For launchers with a fire control system, avoid exerting too much force when pulling the trigger; use the force needed for successful firing. Excessive force may break the internal motherboard, and repair fees will apply in such cases.
    2. If using a yellow XT30 connector, be sure not to reverse the positive and negative poles before inserting the battery!!! Short circuits can burn the motherboard, and repair fees will apply.
    3. Remember to remove the battery after using a launcher with a fire control system, as there is still a weak current consumption even when not firing.
    4. Charge the battery as soon as possible upon receipt.
    5. Batteries are consumables and are not covered by warranty, so please handle them with care and follow the instructions.



    Motor Heating


    Brushed motors heating up is a normal phenomenon, and there are two solutions.

    1. Use a handle set.
    2. Switch to a brushless motor (suitable for those who frequently engage in semi-automatic group battles. However, if your usage frequency is not that high, the economical solution is to stick with this cheap brushed motor. There's no significant difference between strong magnets and this affordable motor. In summary: either go brushless or opt for a cheap brushed motor, don't choose something in between).
    3. Minimize the use of single shots to increase the lifespan of the motor and battery.

     

    What is the performance of this gel blaster?


    Shooting performance: 280 fps

    35-40 RPS !

    What is the capacity of the magazine?

    The capacity of the magazine is about 200 gel balls.

      

    What is the size of the product and the box?


    The product is 77 cm long and 36 cm high.

    The box measures 56 cm by 38 cm by 13 cm.